User guide

23-8 Time Guardian Series – Nexus Lite Module
Amano recommends that you have the appropriate information before you begin the Setup
Wizard. Should you need to exit the Setup Wizard before completion, your settings will be
saved.
Once the Setup Wizard is finished, the Wizard Complete
button will become active. At this
point, all settings will be applied, including the time synchronization between the NLM software
PC and the connected terminals.
If the Wizard Complete button is not active, you must review your setup, verifying that all
mandatory fields (in red) have been completed. When all required fields are complete, the
Wizard Complete button will then be displayed.
Should you have any questions or require additional information, please email
[e-mail]
or check the Amano Knowledge Base at
www.amano.com/tkb
The following information will sequentially guide the user through the Setup Wizard data entry.
See the remaining paragraphs of this Chapter for Access Module for more additional functional
descriptions especially paragraphs describing the Setup Wizard and the functionality of the
Nexus Lite Management (NLM) software.
Step 1: General Setup (NLM) [Optional Step]