User guide

Time Guardian Series – Zone Differential Module 18-9
• Day: The day that the Zone Differential will begin. For Schedule Start and First IN Punch
this field is set to Current. For Fixed Time, select 1 days before, Current Day, 1 days
after, 2 days after, or 3 days after.
• From: Enter the time (HH:MM) that the Zone Differential will begin.
• Day: The day that the Zone Differential will end. For Schedule Start and First IN Punch
this field is set to Current. For Fixed Time, select 1 days before, Current Day, 1 days
after, 2 days after, or 3 days after.
• To: Enter the time (HH:MM) that the Zone Differential will end.
• Punch Type: For Fixed Time and Schedule Start this field is set to Actual Time. For First
IN Punch, select either Actual or Rounded Time.
• Qualification: Click on the button to set the Qualification, and the Zone
Qualifications window will appear:
a. Select a Qualification from the Qualification list and click on the Add button. The
choices are; Work Hour, Before Schedule, Within Schedule, After Schedule,
Schedule, and Zone. A row will appear in the Qualification Rule box.
b. Enter the following:
• Process Type: Select either Stop or Next(nth). Stop will process the qualification
rule if the qualification is met, and “Stop”, disregarding any subsequent rules.
Next(nth) will process the qualification rule if the qualification is met, and move to
the Next or nth Qualification Rule.
• Process Number: Required when Next(nth) is set as the Process Type. It
designates which Qualification Rule will be processed when the qualification is
met in the current rule. If the qualification is met, then the “Next” or “nth number”
rule is processed in relation to the current rule’s position and not order of
appearance.
• Not Qualified Zone Code: Select the Zone Code from the list that will be applied
to the qualification.
• Zone Award: Click on the Zone Award button, and the following
window will appear: