User guide

14-4 Time Guardian Series – Advanced Rounding Module
3. Enter a name for the Rounding Template in the name field [required field].
4. Enter a description of the Rounding Template in the Description field.
5. Click on Break/Meal if rounding template is to be applied.
6. Select the desired rounding type and options: hour rounding or punch rounding. If selecting
Punch Rounding the boxes alongside Grace, First IN/Last OUT, All IN/OUT, Open
Schedule, and Transfer will become selectable. The corresponding tab on the Rounding
Templates screen will become configurable depending upon the type(s) of Punch Rounding
selected.
Note: If you wish to duplicate the properties of an existing Rounding Template for another
Rounding Template, select the desired Rounding Template, open it, enter in a new
name and click on the
button. The new Rounding Template will appear in the Main
View.
Note: If you wish to visualize the properties of a Rounding Template, view the Rounding Demo
by clicking on the
button on the bottom of the Rounding Templates screen. The
following Rounding Demo view will appear:
Clicking in the dropdown boxes for Hour and Minute will set the actual time clock display, while
clicking in the dropdown boxes in Unit and Point will enter the rounding rules. This presents a
real time visual display of actual time versus rounded time.