Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 8

9. Press the PROGRAM button to exit programming or Press + to go to the

next program menu.

Enabling or Disabling Daylight Saving Time (P3)

Note – when this setting is set to ENABLED, the clock’s time will

automatically change for Daylight Saving. When this setting is set to

DISABLED, the clock’s time will NOT change for Daylight Saving.

1. With the cover removed, press the PROGRAM button to begin

programming mode and P1 TIME will appear.

2. Press the + button to change the current programming

mode until the display shows P3 DAYLIGHT

SAVING. [The second line will scroll].

3. Press the ENTER button and the clock will begin flashing

the current Daylight Saving setting.

4. Press the + or – button to change the Daylight Saving setting to the

desired value of ENABLED or DISABLED. The default setting =

Enabled [ON].

5. Press the ENTER button to set [save] the current value and go back to

the previous menu.

6. Press the PROGRAM button to exit programming or Press + to go to the

next program menu.

Changing the Print Format (P4) 12Hr (Standard) or 24Hr

(Military) Default = Format-1 (12hr)

1. With the cover removed, press the PROGRAM button to begin

programming mode and P1 TIME will appear.

2. Press the + button to change the current programming

mode until the display shows P4 PRINT FORMAT.

[The second line will scroll].

3. Press the ENTER button once and the clock will flash

the current print format. The default setting = FORMAT-

4. Press the + or – button to increase or decrease the print format value to

1, 2, 3, 4, 5, or 6. See the following for examples of Print Format: