Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 7
Setting the Time (P1)
1. With the cover removed, press the PROGRAM button to
begin programming mode and P1 TIME will appear.
2. Press the ENTER button one time. The hours will start
flashing.
3. Press the + or – button to increase or decrease the hours to the desired
value.
4. Press the ENTER button once to accept the current hours and go to the
minutes setup mode. The minutes will start flashing.
5. Press the + or – button to increase or decrease the minutes. The seconds
will automatically start at zero when entering minutes.
6. Press the ENTER button once to accept the current minutes and go back
to the previous menu.
7. Press the PROGRAM button to exit programming or Press + to go to the
next program menu.
Note – During programming the time should be set depending on
the mode the display is currently set in [either 12-hour or 24-
hour].
Setting the Date [Month/Date/Year](P2)
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + button to change the current programming
mode until the display shows P2 DATE.
3. Press the ENTER button once and the clock will display
the current date on the 2
nd
line. The month will start
flashing. Press the + or – button to increase or decrease
the month value.
4. When the desired month is reached, press the ENTER button once to
accept the current month and go to the date setup mode.
5. The date of the month will start flashing. Press the + or – button to
increase or decrease the date to the desired value.
6. Press the ENTER button once to accept the current displayed date of the
month and go to the year setup mode.
7. The year will start flashing. Press the + or – button to increase or
decrease the year to the desired value.
8. Press the ENTER button once to accept the current displayed year and
return to the previous menu.