Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 44
1. Using the supplied mounting template (see last page of this guide), mark
the two (2) mounting slots on the wall. A 3
rd
mounting slot can be used to
provide security (see Figure 7).
2. Verify that the cable for the AC Power Adapter is plugged into the back of
the TCX-85 before hanging it on the wall.
3. Hang the TCX-85 on the wall level using #10 wood screws [not included]
or equivalent in the two mounting slots without removing the cover.
4. If security is an issue for removing the TCX-85 from the wall, remove the
cover, and use the upper mounting slot (see Figure 7 below or Figure 6 on
page 41) to firmly secure the back of the TCX-85 to the wall. Secure to
the wall using #10 wood screw (or equivalent).
5. Replace the cover for normal operation.
Figure 7: TCX-85 Rear View for Wall Mounting