Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 43
Feature
(Menu Item)
Description
Install
Guide
P608 AUX DISPLAY
Select either Date or line number format
to be displayed on the 2
nd
line [auxiliary
line].
Pg. 24
P609 DLS BEGIN DATE
Change DLS start date from factory
default setting.
Pg. 26
P610 DLS END DATE
Change DLS end date from factory
default setting.
Pg. 26
P611 TIME ZONE
Select desired time zone.
Pg. 27
P7 DIAGNOSTICS
Access submenu items for additional
features
Pg. 28
P701 MAIN BOARD
Check firmware version of main board
Pg. 28
P702 SHOW INK COUNT
Show total number of prints since unit
was manufactured (cannot be reset)
Pg. 29
P703 SHOW WARNING
MESSAGE
Displays the most recent warning
message
Pg. 29
P704 LCD TEST
Test each segment of LCD display
Pg. 30
P705 ADVANCED
Advanced diagnostics (factory codes)
Pg. 30
Warranty Notice
Any claim for warranty, expressed or implied, due to the clock’s failure to
properly receive the radio signal because of interference, whatever the
source of this interference may be, are hereby expressly excluded.
For more information about the WWVB radio signal, actual signal coverage in
North America visit NIST’s website at:
http://www.nist.gov/pml/div688/grp40/radioclocks.cfm
For actual signal coverage in North America visit:
www.boulder.nist.gov/timefreq/stations/wwvbcoverage.htm
Wall Mounting (Optional)
Avoid the following: