Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 38
For error messages ER 01 through ER 05, unplug the clock before
checking to see that the carriage is not stuck or jammed. Also, check to see
that the ribbon cables are in good condition. After clearing any jams, plug
the clock back in. Contact us at 1-800-253-9836 if you need assistance.
Figure 3: TCX-85 Reset Button Location.
Table: Error Messages
Error
Cause
Solution
Er 01
Home Position
Error, Carriage
Stuck.
Unlock cover and remove. Set TCX-85 on its
side with the ribbon side up. Press the Reset
button to reset the printer carriage and blow
air into the printer platen (see Figure 4: TCX-85
Print Margin Adjustment on page 34) to remove
or dislodge jammed objects (i.e., staples).