Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 36
Step 4. Turn the knob on the cartridge clockwise one turn to
take up any slack in the ribbon (see right-hand
Figure).
Step 5. Stamp a card to check the printing quality and
confirm that you have installed the ribbon cartridge
properly.
Note – If the print mechanism is down (a piece of paper could not be
inserted), press the RESET button to move the carriage to the up
position. This will make the ribbon cartridge installation easier. The
Margin Selector (see Figure 2) can be moved toward the rear of
the clock to provide more clearance for ribbon replacement.
Remember to slide back to original location once finished.
Figure 2: TCX-85 Ribbon Cradle Location.