Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 29

the bottom line. [See right-hand figure for example].

5. Press ENTER button once to exit and go back to the

previous menu.

6. Press the PROGRAM button 2 times to exit ALL

programming or Press + to go scroll through sub menu options for P7

DIAGNOSTICS again.

Show Ink Count (P702)

1. With the cover removed, press the PROGRAM button to begin

programming mode and P1 TIME will appear.

2. Press the + or – button to change the current programming mode until

the display shows P7 DIAGNOSTICS.

3. Press the ENTER button once and the clock will

display the sub menu for other settings such as

P701.

4. Press the + or – button until the display shows

P702 SHOW INK COUNT. [The second line will

scroll]

5. Press the ENTER button once and the clock will display the total

number of prints on the bottom line.

6. Press the ENTER button once to exit and go back to the previous

menu.

7. Press the PROGRAM button 2 times to exit ALL programming or Press

+ to go scroll through sub menu options for P7 DIAGNOSTICS

again.

Warning Message (P703)

Use this diagnostic to check the TCX-85 LCD for any warning messages.