Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 28
4. Press the + or – button until the display shows
P611 TIME ZONE.
5. Press the ENTER button once and the clock will start flashing the
current time zone setting.
6. Press the + or – button to change the value. Your choices are
EASTERN, CENTRAL, MOUNTAIN, PACIFIC, and various GMT settings.
The default = PACIFIC, Use the + button to change the value to
MOUNTAIN  CENTRAL  EASTERN.
7. Press the ENTER button once to accept the current displayed value
and go back to the previous menu.
8. Press the PROGRAM button 2 times to exit ALL programming or Press +
to go scroll through sub menu options for P6 OTHERS again.
Diagnostics
Warning: The diagnostic menu should generally not be used unless
advised by our support staff.
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + or – button to change the current
programming mode until the display shows P7
DIAGNOSTICS [The second line will scroll].
See the following sections for specific diagnostics.
3. Press the PROGRAM button exit programming
and return the clock back to normal operation.
Main Board Version (P701)
Use this test to check the firmware version of the main board (Freescale)
microcontroller.
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + or – button to change the current programming mode until
the display shows P7 DIAGNOSTICS.
3. Press the ENTER button once and the clock will
display
P701 MAIN BOARD VERSION. [The second
line will scroll]
4. Press the ENTER button once and the clock will
display the current main board firmware version on