Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 27

thereafter. To change the begin date for Daylight Saving, refer to the

previous section.

1. With the cover removed, press the PROGRAM button to begin

programming mode and P1 TIME will appear.

2. Press the + or – button to change the current programming mode until

the display shows P6 OTHERS.

3. Press the ENTER button once and the clock will display the submenu

for other settings such as P601.

4. Press the + or – button until the display shows

P610 DLS END DATE. [The second line will scroll]

5. Press the ENTER button once and the month will start

flashing. Press the + or – button to increase or

decrease the month value.

6. Press the ENTER button once to set the desired month and go to the

date setup mode.

7. The date will start flashing. Press the + or – button to

increase or decrease the date.

8. Press the ENTER button once to set the desired date

and go to the year setup mode.

9. The year will start flashing. Press the + or – button to

increase or decrease the year.

10. Press the ENTER button once to set the desired year and complete the

set DLS end date mode and go to the previous menu.

11. Press the PROGRAM button 2 times to exit ALL programming or Press +

to go to the next program menu.

Note – In order for the Daylight Saving Time feature to function