Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 23
3. Press the ENTER button once and the clock will display the submenu
for other settings such as P601.
4. Press the + or – button until the display shows
P605 ATOMIC CLOCK.
5. Press the ENTER button once and the clock will
start flashing the current atomic clock setting.
6. Press the + or – button to change the value to
either ENABLED or DISABLED. The default setting = Enabled [ON].
7. Press the ENTER button once to accept the current displayed value
and go back to the previous menu.
8. Press the PROGRAM button 2 times to exit ALL programming or Press +
to go to the next program menu.
Note FAQ – If the Atomic Clock feature has been turned off by
setting to disable, pressing the “Reset” button or changing the
time will not turn the feature back on. The feature must be
Enabled by following the above steps.
Set Display Contrast (P606)
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + or – button to change the current programming mode until
the display shows P6 OTHERS.
3. Press the ENTER button once and the clock will display the submenu
for other settings such as P601.
4. Press the + or – button until the display shows
P606 LCD CONTRAST. [The second line will
scroll].
5. Press the ENTER button once and the clock will
start flashing the current display contrast setting.
6. Press the + or – button to change the value. Your choices are 0 to 15.
The default = 7.
7. Press the ENTER button once to accept the current displayed value
and go back to the previous menu.
8. Press the PROGRAM button 2 times to exit ALL programming or Press +
to go to the next program menu.