Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 21

Set Paper Detection (P602)

The paper detect sensor can be set for Center, Edge, Either or Both. Amano

recommends the default setting of EITHER for paper detection. If your TCX-

85 is not printing, make sure you are triggering the paper sensor, which can

be changed with this parameter.

1. With the cover removed, press the PROGRAM button to begin

programming mode and P1 TIME will appear.

2. Press the + or – button to change the current programming mode until

the display shows P6 OTHERS.

3. Press the ENTER button once and the clock will display the submenu

for other settings such as P601.

4. Press the + or – button until the display shows

P602 PAPER DETECT. [The second line will

scroll]

5. Press the ENTER button once and the clock will

start flashing the current paper detection setting.

6. Press the + or – button to change the value. Your choices are EDGE,

CENTER, EITHER or BOTH. The default = EITHER.

Note – The CENTER setting cannot be used for Amano time cards

Part Number (AMA5200). For these cards use EDGE or EITHER.

7. Press the ENTER button once to accept the current displayed

value and go back to the previous menu.

8. Press the PROGRAM button 2 times to exit ALL programming or Press +

to go to the next program menu.

Set Print Direction (P603)