Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 20
Enabling/Disabling Auto Print (P601)
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + or – button to change the current programming mode until
the display shows P6 OTHERS.
3. Press the ENTER button once and the clock will display P601 PRINT
METHOD. [The second line will scroll]
4. Press the ENTER button once and the clock will start flashing the current
print method format. The default setting = AUTO. The mode choices are:
Mode
Description
Auto
Will automatically print a single print when media is
inserted.
Manual
Requires you to use the PRINT button when printing.
Caution – when the clock is in the manual print mode print media
should be inserted in the clock before the print button is pressed to
protect the print head.
5. Press the + or – button to change the value.
6. Press the ENTER button once to accept the current displayed value and
go back to the previous menu.
7. Press the PROGRAM button 2 times to exit ALL programming or Press +
to go to the next program menu.
Note – When the clock is in the manual print mode, the manual print
buttons are enabled when the program mode is exited. Pressing
either of these buttons will cause the clock to print. When 2 print
lines are configured, pressing the Left button will print line 1, while
pressing the Right button will print line 2.