Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 15
Setting Custom Print (Symbol Printing)(P506)
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + or – button to change the current programming mode until
the display shows P5 CUSTOMIZE.
3. Press the ENTER button once and the clock will display the submenu
for other settings such as P501.
4. Press the + or – button to change the current
programming mode until the display shows
P506 CUSTOM PRINT.
5. Press the ENTER button and the clock will
display LINE- - 1 01, press ENTER and the
clock will display Ln0101 – END. Press ENTER one more time to finish
or the + / – buttons to change values (See Symbol Table on page 19).
6. Once Line – 1 has been programmed and saved (by pressing enter)
, you can go back to step 5 and select LINE - - 1 or LINE - -2 by using
the + or – buttons.
7. From the chosen line (either Line – 1 or Line – 2), press the ENTER
button once to begin programming that line.
(Line 2 does not have to be programmed).
During custom print setup the 2
nd
line on the
display [auxiliary display line] will display the
current print symbol option item (see right-
hand Figure).
8. Press the + or – button until the desired print
symbol item is displayed and press the ENTER button once to accept
the flashing symbol value. Once a symbol item has been selected the
number of symbols shown on the right will
increment by one. See right-hand Figure for
example showing MONTH as the 02 [second]
print symbol selected for Line -1.
9. Repeat the process described in step 8 to enter
each element for line 1. Select the “END”
symbol followed by pressing the ENTER button
once to complete custom programming of line 1.