Operation Manual

PIX-75 www.amano.com/time  1-800-253-9836 13
Set Print Leading Zero (P504)
The leading zero setting affects the month (if language is set to numeric),
date, and hour printing. The other symbols [year, seconds, minutes, etc.]
will ignore this setting and always print a leading zero in front of a single
digit.
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + or – button to change the current programming mode until
the display shows P5 CUSTOMIZE.
3. Press the ENTER button once and the clock will display the submenu
for other settings such as P501.
4. Press the + or – button until the display shows
P504 PRINT LEADING ZERO. [The second
line will scroll]
5. Press the ENTER button once and the clock will
start flashing the current leading zero format.
6. Press the + or – button to change the LEADING
ZERO setting to the desired value. Your choices are ENABLED or
DISABLED. The default setting = Disabled [OFF]. When it is turned off,
the printer will not print a leading zero before a single digit number
[example: Jan 1].
7. Press the ENTER button once to accept the current displayed value
and go back to the previous menu.
8. Press the PROGRAM button 2 times to exit ALL programming or Press +
to go to the next program menu.
Set Print Language (P505)
1. With the cover removed, press the PROGRAM button to begin
programming mode and P1 TIME will appear.
2. Press the + or – button to change the current programming mode until
the display shows P5 CUSTOMIZE.
3. Press the ENTER button once and the clock will display the submenu
for other settings such as P501.
4. Press the + or – button until the display shows
P505 PRINT LANGUAGE. [The second line will
scroll].
5. Press the ENTER button once and the clock will
start flashing the current print language format. The
default setting = ENGLISH.