Operation Manual

TCX-45 www.amano.com/time
 1-800-253-9836 3
Setting the Time (If Displayed Time is Incorrect or In
Different Time Zone)
1. Unlock and remove the cover.
2. Press the HOUR advance button until the correct hour appears.
3. Press the MINUTE advance button until the correct minute appears.
Note – You must follow this procedure if you are installing the TCX-45
in a different Time Zone from where it is currently programmed.
Setting the Month and Date
1. Press the PROGRAM button until dA E PI appears,
then release. Next press the ENTER button.
2. Press the CHANGE button until the correct year
appears, then press the ENTER button.
3. Press the CHANGE button until the correct date
appears, then press the ENTER button.
4. Press the CHANGE button until the correct month
appears, then press the ENTER button.
5. The display should now be flashing the correct
month, date and year. Press the ENTER button to
save.
6. Press the PROGRAM button to exit.