Operation Manual

TCX-45 www.amano.com/time
 1-800-253-9836 1
Warranty Notice
Any claim for warranty, express or implied, due to the clock’s failure to properly
receive the radio signal because of interference, whatever the source of this
interference may be, are hereby expressly excluded.
For more information about the WWVB radio signal, actual signal coverage in North
America visit NIST’s website at: http://tf.nist.gov/stations/radioclocks.htm
For actual signal coverage in North America visit:
www.boulder.nist.gov/timefreq/stations/wwvbcoverage.htm
Specifications
Power Requirements
For Clock Input:
16.5 VDC, 60Hz, 0.6A (Max.)
For AC Adapter:
100 VAC ± 10%, 50/60Hz
120 VAC ± 10%, 60Hz
230 VAC ± 10%, 50/60Hz
Battery:
Lithium Battery for Memory Backup in case of power
failure (factory installed).
Ambient Temperature:
-10°C to 45°C (14°F to 113°F)
Ambient Humidity:
10% to 90% (non-condensing)
Dimensions:
6-11/16"(170 mm) Wide X 6- 7/16”(163 mm) High X
6-5/8"(168 mm) Deep.
Weight:
A
pproximately 3.6 lbs. (1.63 kg)
Environment:
Indoor use only; dust-free environment. Keep out of
direct sunlight.
External View Internal View
 The PROGRAM button is used to enter and exit the Program Mode.
 The CHANGE button is used to change the information on the display.
 The ENTER button is used to accept the information shown on the display and
save it in memory.
 The HOUR button advances the hour in the display by increments of 1.
 The MINUTE button advances the minutes in the display by increments of 1.