Operation Manual

TCX-45 www.amano.com/time
 1-800-253-9836 15
7. PresstheENTERbuttononce.Yourdisplaywillread“ 00”.Thezero
ontherightshouldbeflashing.
8. PresstheCHANGEbutton2(two)times.Thedisplaywillread“02”.
9. PresstheENTERbuttononce.Theleftzeroshouldnowbeflashing.
10. PresstheCHANGEbutton3(three)ti
mes.Thedisplaywillread
“32”.
11. PresstheENTERbutton2(two)times.Thedisplaywillnowread
“dIA9
18”
12. PressthePROGRAMbuttononcetoexitfromprogramming.
The programmable memory in your TCX-45 has now been reset to the factory
default. Please insert a piece of media to conduct a test print. If the error
message does not come back, you can now reprogram your unit to the current
date and time. However, if the error message returns, please call 800-253-9836
for additional assistance.
Cleaning
Do not use any chemical solvents or oils to clean or lubricate your TCX-45. This
will damage your clock. To clean the inside of your clock, simply blow it out with
air.
Resetting Clock After Extended Loss of Power
If there has been a power interruption of duration sufficient to drain the internal
lithium battery, the date setting, the clock setting and the Daylight Saving Time
setting will each need to be reset.