Operation Manual

14 www.amano.com/time
 1-800-253-9836 TCX-45
Figure: Ribbon Carriage Grease
Should you need further assistance in clearing an error message:
1. Visit our website at: http://www.amano.com/time
or
2. Call us at: 1 [phone]
 Monday – Friday 8:00am – 5:00pm (EST)
Clearing the Memory on the TCX-45 – “Prt er” Error
Message
Before you begin, press the reset button on the bottom of the unit. The reset
button is located in the back right corner on the bottom of the clock. (Inside an
opening). The time must be visible on the display to be able to program the unit.
1. PressthePROGRAMbuttondownfor2seconds,thenrelease.Your
displaywillread“dAtE
P1”
2. PresstheCHANGEbutton4(four)times.Yourdisplaywillread
“Othr
P5”
3. PresstheENTERbuttononce.Yourdisplaywillread“ Prnt
11”
4. PresstheCHANGEbutton7(seven)times
.Yourdisplaywillread
“dIA9
18”
5. PresstheENTERbuttononce.Yourdisplaywillread“ SoFt
d1”
6. PresstheCHANGEbutton3(three)times.Your displaywillread
“CLr
d4”