Operation Manual

TCX-45 www.amano.com/time
 1-800-253-9836 11
Step 5. Turn the knob on the cassette clockwise one turn
to take up any slack in the ribbon (see figure).
Step 6. Reset the INK indicator
by pressing the CHANGE and ENTER buttons at the same time.
Step 7. Stamp a card to check the printing quality and confirm that you have
installed the ribbon properly.
Step 8. Replace the cover (locks automatically).
The Amano Part number for a set of TCX-45 keys is AJR-201150
Note – A key is required to unlock the top cover which allows you
access to the ribbon cartridge for replacement and/or the
programming buttons.
When ordering parts and/or accessories, be sure to include your TCX-45 model
number.
The TCX-45 ribbon cartridge in Black ink is:
Amano Part No. CE-315151 Order now!
The TCX-45 ribbon cartridge in Red ink is:
Amano Part No. YK-629671 Order now!
The TCX-45 ribbon cartridge in Green ink is:
Amano Part No. YK-629771 Order now!
These ribbon cartridges are normally good
for approximately 6000 stamps, but they are
supplied in sealed plastic bags to provide an
average shelf life of 2 plus years.