Operation Manual

4 Amano TCX-22 Operation Manual
Make a Test Print
1. Make sure that there is power to the TCX-22 (Refer to Page 3).
2. Insert a piece of paper or time card into the TCX-22. The clock will
automatically print YEAR, MONTH, DATE and TIME with AM or PM.
3. If the imprint is satisfactory, the TCX-22 is ready for use.
4. If you wish to change the time and/or print style on the TCX-22, enter
into Program Mode for various print styles. The next page gives
instructions on programming the TCX-22 to fit your needs.
Adjusting the Margin
1. Unlock and remove the
cover. Note – suggest
unplugging the clock
before performing
margin adjustment.
2. Locate the Card Stopper
Adjustment Screw on the
right side of the clock,
below the printer platen.
3. Position a piece of paper or
time card as desired.
4. Loosen the screw to move
the Card Stopper forward or
back. Tighten the screw as
needed. (See top
illustration.) The print
margin can be adjusted to a
maximum of 7/8” (22 mm).
Illuminated Print Option
The TCX-22 is equipped with a feature that allows
the print area to illuminate. The switch is located
on the back panel. When connected to an AC
adapter the unit will stay illuminated. When used
with a battery, it illuminates for about 20 minutes
every time the LED switch is pressed.