Operation Manual

Amano TCX-22 Operation Manual 15
2. When the display flashes dl LCd (LCD segments
check), press the ENTER button.
3. When all of the LCD segments are turned on, press
the ENTER button to advance to the next step.
4. When the display flashes d2 nPr
(total number of
prints), press the ENTER button.
5. The number of prints counted will be displayed. Press
the ENTER, then CHANGE button to advance to the
next step.
6. When the display flashes d3 CLr (memory clear),
press the ENTER button.
7. To clear the memory and reset the defaults, press the
CHANGE button until the 3 appears, then press the
ENTER button. Press the CHANGE button until the 2
appears, then press the ENTER button.
8. When the display flashes 32, press the ENTER
button.
Exit Program Mode
Press the PROGRAM button and the display will show the current date.
The clock hands will reset to the current time.
Note: The TCX-22 uses a Lithium battery to maintain the user settings incase of
a power failure. If a power failure occurs and the Lithium battery is dead,
the time clock settings may revert to default settings (i.e., DST Begin and
End dates may change).