Operation Manual

12 Amano TCX-22 Operation Manual
Setting the Language
1. When the display flashes I2 LAn9, press the ENTER
button.
2. Press the CHANGE button until the correct language
appears, then press the ENTER button.
3. When the display flashes I2 LAn9, press the CHANGE
button to move to the Print Direction. Please refer to
the table below for Language selections.
English Spanish French Portuguese
LI En9 L2 SPn L3 Frn L4 P 9
Setting the Print Direction
1. When the display flashes I3 Prdr, press the ENTER
button.
2. Press the CHANGE button until the correct direction
appears, r 9h
for Right Side Printing, or LEF for Left
Side Printing, then press the ENTER button.
3. When the display flashes I3 Prdr, press the CHANGE
button to move to the Auto Print Setting.
Setting the Auto Print
1. When the display flashes I4 APr , press the ENTER
button.
2. Press the CHANGE button until the correct printing
mode appears, then press the ENTER button.
Auto Print (on P:): Will automatically print a single
print when media is inserted.
Manual Print (OFF): Requires you to use the PRINT button when
printing.
Precision Print (on P:5): Enables you to print multiple or
consecutive prints when holding down the PRINT
button.
3. When the display flashes I4 APr
, press the CHANGE
button to move to the Leading Zero Setting.