Operation Manual

8 Amano TCX-22 Operation Manual

Accessing the Other Options Menu

1. When the display flashes P5 Oh r, press the ENTER

button.

2. The display will flash the first programming step in the

Other Options sub-menu. Press the CHANGE button

to advance through the menu selections.

Code

Menu Function

I1 Prn

Set Print Style using Symbol or Print Style Codes

I2 LAn9

Sets the Language of the print out

I3 Prdr

Sets the Print Direction (left or right hand)

I4 APr

Disable, enable, or configure the Auto print option

I5 2Er0

Disable/enable Leading Zero in print out

I6 bdL

Set the date that Daylight Saving Time begins

I7 EdL

Set the date that Daylight Saving Time ends

I8 dIA9

Accesses the Diagnostic Routine

Setting Up Alternate Print Styles

Note: If you do not wish to use one of the Quick Set-Up Code settings, you may

select from the Alternate Print Style sub-menu.

1. When the display flashes11 Prn , press the ENTER

button.

2. Press the CHANGE button to move from Code setting

to Symbol setting. If you select Code, you must enter

a Print Style Code from Table 1 on the next page. If

you select Symbol, you can “build” a custom Print

Style using Tables 2 and 3 on pages 10 and 11.

3. When the display flashes the correct setting, press

the ENTER button.

Selecting a Print Code

Note: Refer to Table 1 on the next page for Print Style Codes.

1. When the display flashes Pr COdE, press the ENTER

button.

2. Press the CHANGE button until the desired number

appears in the first position. Press the ENTER button.

3. Press the CHANGE button until the desired number

appears in the second position. Press the ENTER

button.