Operation Manual

Amano TCX-21 Operation Manual 6
3. When P1 dAtE flashes in the display, release the
PROGRAM button. To move to the next menu item,
press the CHANGE button.
Note: If no other button is pressed after five minutes, the clock will return to the
Normal Mode and the clock hands will reset.
Setting the Year, Month and Date
1. When the display flashes P1 dAtE, press the ENTER
button.
2. Press the CHANGE button until the correct year
appears, then press the ENTER button.
3. Press the CHANGE button until the correct month
appears, then press the ENTER button.
4. Press the CHANGE button until the correct date
appears, then press the ENTER button.
5. When the display flashes the correct year, month and
date, press the ENTER button.
6. When the display flashes P1 dAtE, press the CHANGE
button to move to Setting the Clock Time.
Setting the Clock Time
Note: Use a 24 hour and 60 minute format when setting the time.
For example, 2:00 PM = 14:00.
1. Press the PROGRAM button for two seconds.
2. Press the CHANGE button until the display flashes
P2 CLoc, then press the ENTER button.
3. Press the CHANGE button until the correct hour
appears, then press the ENTER button.
4. Press the CHANGE button until the correct minute
appears, then press the ENTER button.
5. When the display flashes the correct time, press the
ENTER button.
6. When the display flashes P2 CLoc, press the
CHANGE button to move to the Daylight Saving
Time On/Off Setting.