Operation Manual

Amano TCX-21 Operation Manual 10
Code Print Style Print Direction
5830 MONTH, DATE, 24H, 100th Left Side Printing
5570 YEAR, MONTH, DATE, 12H, 60th Left Side Printing
5071 YEAR, MONTH, DATE, RCV’D Left Side Printing
5072 YEAR, MONTH, DATE, SENT Left Side Printing
5073 YEAR, MONTH, DATE, FAX’D Left Side Printing
5074 YEAR, MONTH, DATE, VOID Left Side Printing
5075 YEAR, MONTH, DATE, PAID Left Side Printing
5076 YEAR, MONTH, DATE, CFM’D Left Side Printing
5077 YEAR, MONTH, DATE, APR’D Left Side Printing
5078 YEAR, MONTH, DATE, CMPL’D Left Side Printing
5079 YEAR, MONTH, DATE, ORIGN Left Side Printing
5070 YEAR, MONTH, DATE, FILE Left Side Printing
If you cannot locate the desired print style from the above list, refer to the
instructions on the next page for programming the print style using
symbols.
Customizing a Print Style Using Character Symbols
Note: The maximum displacement (print length) of the print head is 152 dots or
1.4" (35 mm). When viewed on the LCD display, this value becomes a
percentage, where the maximum allowable value is 99%. To determine if
your desired symbol will print, add the lengths of each character used from
the table. The total should be less than 150 dots or 99%. Please refer to
Tables 2 and 3 representing the print styles, number of dots, or line
lengths.
1. When the display flashes Pr SYbL, press the ENTER
button.
2. Press the CHANGE button until the character symbol
you want to print appears, then press the ENTER
button.
3. A n symbol will appear in the display to designate the
first Symbol Code has been assigned.
4. Continue to assign codes until you have finished.
5. Press the CHANGE button until the En code flashes,
then press the ENTER button.
6. When the display flashes II Prnt, press the CHANGE
button to move to the Language Setting.