Operation Manual

Amano TCX-11 Operation Manual 7
Disabling/Enabling Daylight Saving Time (DST)
Note: When this setting is set to ON, the clock’s time will automatically change
for DST. When this setting is set to OFF, the clock’s time will not change
for DST. The dates to begin and end DST are set in the Other Options
Menu (See page 8).
1. When the display flashes P3 dL St, press the ENTER
button.
2. Press the CHANGE button to alternate between On
and Off.
3. When the display flashes the correct setting, press
the ENTER button.
4. When the display flashes P3 dL St, press the
CHANGE button to move to the Quick Set-Up Code
setting.
The Quick Set-Up Code Setting
Note: If you do not wish to use one of the Quick Set-Up Code settings, you may
set an alternate style on the following page.
1. When the display flashes P4 Prnt, press the ENTER
button.
2. The display will flash the current setting. Press the
CHANGE button to scroll through each of the Quick
Set-Up Code Settings.
Code Print Style Print Direction
Pr-1
Day, 24Hr., 100th/Hr Right Side Print
Pr-2
Day, 12Hr., 60th/Hr. Right Side Print
Pr-3
Month, Date, 24Hr., 100th/Hr. Right Side Print
Pr-4
Month, Date, 12Hr., 60th/Hr. Right Side Print
Pr-5
2 Digit Year, Month, Date, 12Hr., 60th/Hr. Right Side Print
Pr-6
4 Digit Year, Month, Date, 12Hr., 60th/Hr. Right Side Print
Pr-7
4 Digit Year, Month, Date, 24Hr., 60th/Hr. Right Side Print
3. When the display flashes the correct setting, press
the ENTER button.
4. When the display flashes P4 Prnt, press the
CHANGE button to move to the Other Options menu.