Operation Manual

Amano TCX-11 Operation Manual 17
Error Messages
Error Code Cause
E1 Prt
Home sensor, motor carriage stuck
E2 Prt
Time sensor, carriage stuck
E3 Prt
Home sensor
E4 Prt
Carriage stuck
Er Pr t
General print error
dLt
Daylight Saving Time Program
For error messages E1 through E4, turn off the power before checking to
see that the carriage is not stuck or jammed. Also, check to see that the
ribbon cables are in good condition. After clearing any jams, restore the
power and press the RESET button. Contact your Amano Cincinnati
representative for assistance.
The dLt error message signifies that an attempt was made to get into the
Program mode during the Daylight Saving changeover one-hour lockout.
Wait one hour and you will be able to program the clock.