Operation Manual

Amano PIX-200 Operation Manual 1-3
GUIDELINES FOR SAFE OPERATION…..
To ensure safe operation, please carefully read the following warnings and cautions
prior to using the PIX 200 Electronic time recorder/stamp.
Warning
Do not disassemble the unit. There is a high voltage present inside,
possibly leading to an
electric shock.
Do not modify the unit. Modifications may cause a fire and/or electric
shock.
If any anomaly occurs, for example, heat or smoke is generated or an odor
is emitted, unplug the unit immediately and contact your dealer for
servicing. There is a danger that further use may cause a fire or electric
shock.
Do not use any voltage of the power source other than designated.
Do not share a single outlet with another plug. These may lead to fire or
shock hazards.
Do not damage, break, or modify the power cord. Do not put a heavy
object on, pull, or
forcefully bend the cord, either. These may damage the
cord, possibly resulting in a fire or electric shock.
If foreign matter should get in the unit (including a piece of metal, water, or
liquid), disconnect the plug from the outlet immediately and contact your
dealer for servicing. There is a danger that further use may cause a fire or
electric shock.
Do not plug or unplug the unit with a wet hand. You may get an electric
shock.
Caution
Do not place the unit on an uneven or tilted surface. This may result in
injuries due to the unit dropping or falling off.
Do not put a water-filled container or a metal object on top of the unit. If
water is spilled or the metallic object slips inside, a fire or shock hazard may
occur.
Do not install the unit in a humid or dusty environment. It may cause a fire
or electric shock.
！
！