Operation Manual

Amano PIX-200 Operation Manual 3-19
4. Press (E) button once to display “P1 LCd
diSPly” to set the display. Press (E) button
once to select either 12-31-06 which
displays the Month-Date-year, or No.
12345678 which displays the number, or
No. RPT. 123456 9 which displays the
number and repeat times, or LinE 3 which
displays the line number of the customized
comment, or “L-6 rAdo” which displays the
level of radio wave strength for the Atomic
Clock signal by pressing the (-) or (+)
button. The level number will increase
when the radio wave signal is stronger).
Press the (E) button to confirm the setting
and now the display will show “P2 Hour
diSPly”
5. Press the (E) button to select either
“AM PM 12:00” which is AM/PM display,
or “23:59” which is the 24 hour display by
pressing (-) or (+) button. Press the (E)
button to confirm your setting and display
“P3 PA55 word”.
6. At P3 PA55 word, press the (E) button to
set the password. The first digit (-) will
blink and it can be set by pressing the (-)
or (+) button. Once you select the first
digit, press (E) to confirm and advance to
the remaining three digits following the
same steps.
Note: When you would like to cancel the
password, change the 1
st
digit back to “-
“ and the password will change to
“____”. It is recommended to keep
password in a safe place (see
directions below if password is lost).
7. Press the (E) button to confirm the
password setting and display
“P4 CloC SynC” to set the time zone
(for US only), select the Offical Standard
Frequency (Europe), and whether the
Atomic Clock function is on or off.
MON TUE WED THU FRI SAT SUN
△ △ △ △ △ △ △
Ｐ２８８ Ｈｏｕｒ
ｄｉ ５Ｐ Ｌｙ
△
△
△
△
►
△
△
△ △ △ △ △ △ △
Ｐ１８８ ＬＣｄ８
ｄｉ ５Ｐ Ｌｙ
Blinking
△
△
△
△
►
△
△
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
△ △ △ △ △ △ △
Ｐ３８８ ＰＡ５５
ｕｕ ｏｒ ｄ８
△ △ △ △ △ △ △
８ＰＡ５ ５８８８
９０ ０９ ８８
△ △ △ △ △ △ △
Ｐ４８８ ＣＬｏＣ
８５ ｙｎ Ｃ８
△
△
△
△
►
△
△
△
△
△
△
►
△
△
△
△
△
△
►
△
△
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN