Operation Manual

3-10
Amano PIX-200 Operation Manual
To set the print pattern perform the following:
1. Unlock and remove the cover.
2. Press the (+) and (E) buttons on the top
of the unit at the same time, holding down
for 2 seconds until SEt UP Pro9 appears
on the display. The “” on the top of the
display will be blinking.
3. Press the (+) button four times to position
the “” under the FRI.
4. Press (E) button once to display “P1 Print
YEAr” to set the year digit.
5. Press (E) button again to display “YEAr
Prn 2” to set the year digit. While the 2 is
blinking, press the (-) or (+) button to select
either “2” digit or “4” digit.
6. Press the (E) button once to confirm the
setting, and display “P2 Print HYPhen” to
set the hyphen between the month and
date. Press the (E) button again to display
HYPhn Pr oFF”. While oFF is blinking,
select either “oFF” or “on” by pressing the
(-) or (+) button.
7. Press the (E) button once to confirm the
setting, and display “P3 Print Hour” to set
the printing style of hour. Press the (E)
button again to display “Hour
AM PM Prn
12H”. While the 12H is blinking, select
either “
AM PM 12H” or “24H” by pressing
the (-) or (+) button.
8. Press the (E) button once to confirm the
setting, and display “P4 Print minUt” to set
the printing style of minutes. Press the (E)
button again to display “min Prn 60”. While
the 60 is blinking, select either “60”,
100A”, 100b(5/100), or “10” by pressing
the (-) or (+) button. [60 = 60 seconds/per,
100A = 100’s of a minute, 100b = 5/100’s
of a minute, and 10 = 1/10
th
of a minute].
9. Press the (E) button once to confirm the
setting, and display “P5 Print Lan9u” to
set the printing language. Press the (E)
button again to display “LAn9u Pr
△△ △△
SEt UP
ro
Blinking
△△ △△
P1 rint
EA
△△ △△
P2 rint
Hy Ph En
△△ △△ △△
P3 rint
ou
△△△△ △△
P4 rint
nn in ut
△△ △△ △△
P5 rint
An 9u
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN