Operation Manual

Amano PIX-200 Operation Manual 3-3
6. While the Year display is blinking, adjust the
year using the (-) or (+) buttons to obtain the
desired year. Once you have the correct
year, press the (E) button to confirm and
return back to the “set up program” display.
7. If you are finished programming the unit,
replace the cover to return the clock to
normal operation mode.
.
Setting the Date Format
The illustrations on the right show samples of the displays. The shaded area
means that the symbols, numbers or characters are blinking.
To set the desired date format perform the following:
1. Unlock and remove the cover.
2. Press the (+) and (E) buttons on the top of
the unit at the same time, holding down for
2 seconds until SEt UP Pro9 appears on
the display. The “▲” on the top of the
display will be blinking.
3. Press the (+) button twice to position the
“▲” under WED.
4. Press the (E) button once to display
Pr ordEr (the print order (style) format) and
the code number will be blinking. While the
code number is blinking, adjust code
number to the desired number (see the
following Date Format Table) by using the
(-) or (+) button. Once you have selected
the code number, press the (E) button to
confirm and return back to the “set up
program” display.
△ ▲ △ △ △ △ △
８８８８ ２００６
１０:２９:８８
△ ▲ △ △ △ △ △
８ＳＥｔ ８ＵＰ８
８Ｐ ｒｏ ９８
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
Blinking
MON TUE WED THU FRI SAT SUN
△ △ ▲ △ △ △ △
８ＳＥｔ ８ＵＰ８
８Ｐ ｒｏ ９８
△ △ ▲ △ △ △ △
Ｐｒ８ｏｒｄＥｒ
８８ ８１ ８８
△ △ ▲ △ △ △ △
Ｐｒ８ｏｒｄＥｒ
８８ ８２ ８８
Blinking
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN