Installation and Operation Guide

2-24 MTX-15 Installation & Operation Guide
Step 13. In the Name field, enter in a unique name [required field] that
will be used to describe the terminal. This field will be
automatically populated with the MAC address when the
eyeglass find button is used.
Step 14. In the Number field, enter in a unique number for the terminal
if allowed.
Step 15. In the Serial No. field, a unique number will appear for a found
MTX-15 terminal.
Step 16. If you wish to assign a Bell Schedule to the terminal, select
one from the dropdown list in the Bells field.
Step 17. If you wish to assign a Terminal Validation setting to the
terminal, select one from the dropdown list in the Validation
field.
Step 18. Click on the Options tab (see Figure 48). To activate the Labor
button on a MTX-15 terminal, place a check in the Labor box.
Step 19. In the Time Format box, select the time format (12-hour or 24-
hour) for the terminal.
Step 20. In the Misc boxes, select whether to enable the RR, Keypad,
and/or Repunch Protection for the terminal.
Figure 48: Software Terminal Options Setup