Installation and Operation Guide

2-16 MTX-15 Installation & Operation Guide
MTX-15 Setup with Amano Time & Attendance Software
Note: Prior to commencing with the Time & Attendance software
Setup Wizard, Amano recommends that you install the MTX-
15 terminal(s), using this MTX-15 Terminal Installation and
Operation Guide. The MTX-15 terminal is installed to
communicate with your PC/Time & Attendance software. You
may need to obtain the IP address for each Ethernet MTX-15
terminal(s) connected to the system. Also, see the section on
“Network Configuration” for how to obtain an automatic IP
and/or enter a specific IP in your MTX-15 terminal.
During the installation and setup of the Time & Attendance software the
Setup Wizard for Step 8: Clock Setup is optional;
Figure 39: Clock Setup from Time & Attendance Software