AMANO ® MJR-8000 Series Computerized Time Recorder Programming / User Guide
Amano Cincinnati Inc. reserves the right to make equipment changes and improvements that may not be reflected in this document. Portions of this document may have been updated to include the latest hardware or firmware version, if applicable. We recommend that this document be read in its entirety before any attempt is made to operate the equipment.
General [1]
General [3]
INSTALLATION ** This page intentionally left blank [11] **
INSTALLATION ** This page intentionally left blank [12] **
PROGRAMMING GUIDE * PROGRAM SETUP PROCEDURE This part of the manual contains a chart to guide you through the Program Setup Procedure. For each step, refer to the page number for detailed instructions on WHAT TO DO.
PROGRAMMING GUIDE * PASSWORD SETUP The MJR-8000 provides you with password protection for certain Program and User Access Codes to offer you added security. After the initialization procedure ’32 E 64 E XXXX E’ the password is automatically set to ‘0000’. It is not required for you to change your password unless you require that extra security.
PROGRAMMING GUIDE ** This page intentionally left blank [P 7] **
ACC-248703 Copyright © 2006 Amano Cincinnati, Inc.
