Operation Manual

CP-5000 User’s Guide 2-1
Chapter 2: Getting Started
Before using the Amano CP-5000 time recorder/stamp, please carefully
review this chapter of the manual, which covers:
• Top cover removal and installation
• Front cover removal and installation
• Placement/Location
• Desktop Installation
• Wall Mounting
• External Signal Connections
• Battery Connection
• Initialization and Reset
• Power Connection
Top Cover
The top cover must be removed to configure, install, and program the
CP-5000. To remove the top cover, follow these steps:
1. Insert the key provided in the keyhole, and turn the key clockwise to
unlock the cover. The top cover should “pop” open.
2. Pivot the top cover upwards, and lift the cover to remove.
3. To re-install the top cover, set and align it with the groves on the
housing, then press it into place until it clicks.