Operation Manual

6-16 CP-5000 User’s Guide
Firmware Version Number (Menu 8, Item 8)
1. If you have not already done so, enter the
Program Mode and press the Function key until
the LED Test menu item appears in the display.
2. Press the Change key seven times. The
Firmware Version Number menu item will appear
in the display.
3. Press the Enter key to start the version display
function. The test number will cease to flash in the
and the firmware version will display.
4. Press the Enter key to stop the test. A beep will
sound and the test number will flash in the
display.
5. Press the Change key to move to the next test
or exit the Diagnostics menu by pressing the
Function key, or by exiting the Program Mode.
Print Counter (Menu 8, Item 9)
1. If you have not already done so, enter the
Program Mode and press the Function key until
the LED Test menu item appears in the display.
2. Press the Change key eight times. The Print
Counter menu item will appear in the display.
3. Press the Enter key to select and the print counts.
A beep will sound and the number of imprints the
clock has made will be displayed.
4. Press the Enter key to complete the test. A beep
will sound and the test number will flash in the
display.
5. Press the Function key to exit the Diagnostics menu, or exit
Program Mode.
Card Print Test (Menu 8, Item 10)
This test, for factory use only, will sequentially print on a time card until it
is full. It is not recommended for field use as it rapidly consumes the ink
ribbon.
Calibration & Sensor Tests (Menu 8, Items 11 - 18)
These are calibration tests for factory use only.