Operation Manual

6-12 CP-5000 User’s Guide
Mode and Keys Test (Menu 8, Item 2)
1. If you have not already done so, enter the Program Mode and press
the Function key until the LED Test menu item
appears in the display.
2. Press the Change key. The Mode and Keys
Test menu item will appear in the display.
3. Press the Enter key to select and start the test.
The test number will cease to flash in the
display, and the first LED indicator (on the left
side of the front panel) will illuminate
4. Place the Mode Switch in the Normal position.
The LED indicator should turn off.
5. Set the Mode Switch back to Program/Ink. The LED indicator should
illuminate. Repeat this sequence several times.
6. To test the keys, place the Mode Switch in the Normal position. The
LED indicator should turn off.
7. Press the Function key, the second LED indicator will illuminate.
8. Press the Enter key, the third LED indicator will illuminate.
9. Press the Change key, the fourth LED indicator will illuminate.
Repeat this sequence several times.
10. Set the Mode Switch back to Program/Ink and press the Enter key
to stop the test. A beep will sound and the test number will flash in
the display.
11. Press the Change key to move to the next test
or exit the Diagnostics Menu by pressing the
Function key, or by exiting the Program Mode.