Operation Manual

6-6 CP-5000 User’s Guide
Timing Sensor Error
This error occurs when a card gets stuck or irregular card motion is
detected by the card transport mechanism. Possible causes are:
• A non-standard time card shape is used or the time card is forced
into the card throat. In either case, the time card sensors detect the
presence of the time card, but the unit is unable to flush out the card.
The time card has to be removed manually to resolve this problem.
• The rubber roller in the card transport mechanism is dirty. The roller
should be cleaned; see page 6-4 for details.
• The time card feed mechanism or time card sensors are damaged.
Password Error
This message is displayed when an invalid password is entered when
attempting to access programming mode.
Real Time Clock Error
This error indicates an unexpected clock value.
Blank Display
When this condition occurs, the CP-5000 will also emit a continuous
beep. If possible, perform the LCD Test in the Diagnostics menu. If this
condition persists, contact your local Amano dealer.