Operation Manual

6-4 CP-5000 User’s Guide
• The slider on the printer carriage is not moving correctly due to a
missing black plastic bushing in the small holes on the right or left
side of the printer frame. Contact your local Amano dealer.
• There is dirt, oil, dust, or ink residue on the surface of the time card
or the time card surface is too rough for the time card sensor to
detect the Column Position Block. Replace the card.
• The background color of the time card is too dark.
Time Card Error
When this message is displayed, printing will stop immediately. This
occurs when the time card is pushed or pulled when fed into the card
throat or during the printing cycle.
Time Card is Full
This message indicates that the time card is full; no more space is
available for printing.
Invalid Card Edge Detection
The block sensor is not detecting the edge of the card. Possible causes
are:
• The rubber roller in the card transport mechanism is dirty. The roller
can be cleaned with Fantastik
®
spray cleaner on a clean cloth or
cotton swab. Be sure to completely dry all residue.