Operation Manual

4-18 CP-5000 User’s Guide
Obtaining a Printout of Programmed Data (Menu 7)
1. If you have not already done so, enter the Program Mode and press
the Function key until the Program Printout menu item (7) appears
in the display. The default value of this item is
zero or OFF.
2. Press the Change key to change the value in
the display to “1” or ON.
3. With “1” flashing in the display, press the Enter
key. The “1” will cease to flash.
4. Insert a time card. All Basic Programming
information will be printed on the time card. The information will be
printed in red ink.
5. If you have programmed one or more Weekly Programs, insert
another time card (or the reverse side of the one used in step 4) to
obtain a printout. Up to twenty Weekly Programs are printed per
card.
In the sample above, program one (STP column: 01) is configures.
For that event, which takes place Mondays and Tuesdays (DAYS
column: 1 and 2) at 10:00 a.m., the buzzer (BZR) will sound, the
relay (RLY) will close, and the ink (CLR) will change to red color.