Operation Manual

4-16 CP-5000 User’s Guide
Creating a Weekly Program
Note: To create a program or schedule, you must cycle through the
sequence of displays of each program number and save the data
entered. The data entered will not be saved if you exit the
Program Mode or press the Function key before completing each
sequence.
1. Enter the Program Mode and press the Function
key until the Weekly Program menu item appears
in the display. The first program number will
appear, with the first cursor or day of the week
(Monday) flashing in the display.
2. Press the Change key to (deselect) omit days of
the week from the schedule or press the Enter
key to (select) include days of the week on the
schedule. Days that the schedule will operate on
will be shown in the display as cursors.
3. When the days of the week are selected, the
display will flash the hour of the selected days
that the schedule will be activated.
Note:
All time programming is done in 24 hour time format.
4. Press the Change key until the hour of the day
(00 thru 23) appears in the display, then press the
Enter key. The digits that represent the minutes
of the hour will appear and flash in the display.
5. Press the Change key until the correct minutes
(00 thru 59) appear in the display, then press the
Enter key. This is the time (hours and minutes)
that the schedule will be activated on the selected
days of the week. The display will move to the
Buzzer, which is the first object to be turned on or
off in the schedule.
6. Press the Change key to enter a value of “0” to
disable (OFF) or “1” to enable (ON) the Buzzer.
When the correct value appears in the display,
press the Enter key. The display will move to the
next object, Signal.