Operation Manual

CP-5000 User’s Guide 4-1
Chapter 4: Programming
Introduction
The CP-5000 must be programmed before use. There are two types of
programming: Basic and Weekly.
Basic Programming is used to program clock functions such as time,
date, time display, Daylight Saving Time (DST) adjustment, and card
imprint.
Weekly Programming consists of activating specific features of the CP-
5000 such as the activation of the built-in buzzer, triggering the relay
signal contacts, and changing the ribbon color at predetermined times of
the day and on specific days of the week.
General Programming Guidelines
Entering Program Mode
Note: ESD precautions should be observed when removing the top
cover.
To enter the Program Mode, remove the top cover and place the Mode
Switch in the Program/Ink position. After entering the password (page 4-
6), the first program menu/item (see Item 5 , page 4-13) will appear in
the display and the first LED indicator will illuminate.