Operation Manual

2-10 CP-5000 User’s Guide
Initialization and Reset
Prior to first use, the CP-5000 must be initialized to clear any possible
unexpected program parameters. Initialization (All Clear) erases all user
programming and resets the time and date to their default settings.
Reset Button
The Reset button can be pressed if the clock becomes unresponsive.
This has the same effect as cycling the power, and will not change the
time and date or erase any programming.
Insert a small screwdriver into the Reset Hole on the bottom of the unit
and press the Reset button.
Initialization (All Clear)
This function is provided to clear all programmed settings (weekly
programs, imprint formatting, etc.) from the CP-5000. When used, all
programming (including time, date and password) will be erased and the
unit will be returned to its default settings. You should only initialize your
CP-5000 prior to programming a new unit or when instructed to in the
Troubleshooting section of this manual.
Note: ESD (Electrostatic Discharge) precautions should be adhered to
when removing the top cover.