Operation Manual

CP-5000 User’s Guide 2-3
Placement/Location
When choosing a mounting location for your CP-5000, you should
ensure the following parameters are met:
• The mounting surface and hardware is capable of supporting the
unit’s weight, approximately 10 lbs., or 4.54 kg.
• The area must be within the specified operating temperature range
(see page 1-1).
• The unit has access to a power source (AC wall outlet).
• The area can accommodate signal and/or power conduits.
• The following conditions do not exist:
Desktop Installation
Place the time recorder on a level surface. The recommended height of
the surface should be 29½” (75 cm) from the floor.