User`s manual

Milestone XProtect Smart Client; User’s Manual
www.milestonesys.com Page 45 Viewing Recorded Images
When a sequence with motion inside the selected area(s) is found, it will be displayed in
the view. Motion will be highlighted:
Motion highlighted in light green color
Tip: The Browse tab’s Time Navigation section control panel will show exact
corresponding time information.
10. If required, click the Next or Previous button again to continue the smart search.
PTZ Control
The Browse tab’s PTZ Control section lets you navigate recorded images from IPIX cameras (IPIX is
a technology allowing creation and viewing of 360-degree panoramic images).
Note: The Browse tab’s PTZ Control section cannot be used for controlling PTZ (Pan/Tilt/Zoom)
cameras, as the Browse tab is used for viewing already recorded images.
Navigation by Dragging inside IPIX Images
Many IPIX images may be navigated simply by dragging inside the images.
If your mouse pointer changes to or similar when placed over an image from an IPIX camera,
navigation by dragging is supported for the camera.
Refer to the release note for information about supported features for individual IPIX cameras.
Navigation Buttons
As an alternative to navigation by dragging inside IPIX images, use the navigation buttons in the
PTZ Control section to move around the view from the selected IPIX camera.
The round middle button lets you quickly move the camera to its home (i.e. default) position.
The plus and minus buttons lets you zoom in and out respectively.