User`s manual

Milestone XProtect Smart Client; User’s Manual
www.milestonesys.com Page 44 Viewing Recorded Images
Example of selected area
With the Smart Search section’s Include and Exclude options, you are able to toggle
between including/excluding areas when you drag. With the Smart Search section’s Invert
button, you are able to quickly invert your selection, if required. Example:
Original selection (left) and inverted selection (right)
5. Click the Smart Search section’s Save button to save your search area settings.
Tip: If you want to experiment with further changes to the search area, you can return
to your saved search area settings by clicking the Load button.
6. In the Smart Search section, select required search sensitivity (Very Low-Very High) in the
Sensitivity list.
7. Select required image interval in the Interval list.
If you select All Images, all images will be analyzed. If you select e.g. 10 seconds, only one
image per ten seconds of recordings will be analyzed. Selecting a long interval will greatly
reduce the time required to complete the search. However, with a long interval, the search
may not find motion sequences that are shorter than the specified interval.
8. Click the Next (move forward in time) or Previous (move back in time) buttons to search
through sequences with motion detected in the selected areas.
Note: Smart search is always carried out from the time of the image you are viewing and
forwards or backwards.
9. The smart search begins, and a progress window displays search progress: