User`s manual

Milestone XProtect Smart Client; User’s Manual
www.milestonesys.com Page 28 Further Configuration
Apply to All
The Apply To All button lets you quickly apply the camera settings for the selected camera to all
cameras in the view.
Customizing Joystick Setup
You are able to customize joystick setup for control of PTZ (Pan/Tilt/Zoom) cameras in the Smart
Client.
Customizing joystick setup requires that a joystick is attached to the computer running the Smart
Client.
Note: Even though joystick control is supported for a large number of PTZ cameras, not all PTZ
cameras may be joystick-controlled. Consult your surveillance system administrator if in doubt;
your surveillance system administrator may refer to the surveillance system’s release note for
information about joystick support for cameras.
To customize joystick setup, do the following:
1. Click the Show Application Menu button in the Smart Client’s top bar:
2. From the menu that appears, select Joystick Setup:
The Joystick Setup window will appear.
3. In the Joystick Setup window, select the required joystick in the Selected Joystick list.
The axes and buttons available on then selected joystick will be listed in the Axis Setup and
Button Setup sections respectively: